Oxford

  Lock pouches (front & rear) keep your padlock off the ground. Water-resistant seams Soft lining protects against scratches Ventilated to reduce condensation. Reflective panels & logos increase visibility at night Tough 3 layer material protects against weather & light knocks Elasticated bottom & adjustable belly strap to hold the cover in place Strategically positioned holes facilitate the use of a lock (front & rear) Clear window for Oxford Solariser battery charger. Rear window to show number plate (optional) IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objects Four Sizes Available: Small Length: 203CM Width: 83CM Height: 119CM Medium Length: 229CM Width: 99CM Height: 125CM Large Length: 246M Width: 104CM Height: 127CM X-Large Length: 277CM Width: 104CM Height: 141CM

Lock pouches (front & rear) keep your padlock off the ground Water-resistant seams Soft lining protects against scratches Ventilated to reduce condensation Reflective panels & logos increase visibility at night Tough 3 layer material protects against weather & light knocks Elasticated bottom & adjustable belly strap to hold the cover in place Strategically positioned holes facilitate the use of a lock (front & rear) Clear window for Oxford Solariser battery charger. Rear window to show number plate (optional)IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objectsLength: 220mmWidth: 77.5mmHeight: 130mm

These HotGrips are specifically designed for motorcycles with 1 handlebars. The grip length is 138mm but can be trimmed to 119mm if required, and has removable chrome end caps so that bar end weights can be fitted. Double bonded, sealed for life Rain proof electronics Draws under 4A Up to 50° C Soft grippy rubber provide comfort and control Removable chrome end caps keep original styling (includes 2 additional dark chrome end caps) Replacement throttle tube for Harley Davidson motorcycles Throttle adaptor for Honda motorcycles Intelligent heat controller - raised and tactile silicone buttons for use with gloves hands Battery saving mode turns the grips off if you forget Clutch mounting bracket and fitting kit included Now mounting bracket for 1 handlebars

Chain: 12mm Hex chain made from Ni-Cro-Mo alloy steel. 1.2m, 1.5m and 2.0m lengths available. Cloth covered chain can be easily stowed under the seat.Padlock: Ultra-strong padlock with hardened boron steel armour casing. Double locking mechanism.

A multi-material road riding glove featuring Alpinestars DRYSTAR® PERFORMANCE sealed membrane for waterproofing and sensitivity on the bike's control, the Belize Glove incorporates a matt carbon knuckle guard for class-leading protection. With an innovative new wrist closure for safely securing the glove, the Belize offers optimized levels of comfort, performance and protection.CONSTRUCTION Multi-panel, multi-material construction consisting of stretch polyamide fabric, leather and perforated leather on backhand. Incorporates Alpinestars' waterproof DRYSTAR® PERFORMANCE sealed triple layer construction for a highly reduced material construction to promotes dexterity and sensitivity of bike controls. Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Leather palm, thumb and fourchettes for comfort and durability. Localized perforations on backhand and palm for comfort and airflow. PU-coated reinforcements on palm and thumb provides superior grip on bike's controls.PROTECTION Synthetic suede reinforcements with padding on the palm. TPU palm and finger sliders to provide abrasion resistance on key impact zones. Molded matt carbon reinforced hard knuckle to increase protection. ARSHIELD reinforcements, consisting of aramid fiber and polyamide for abrasion resistance performance for fourth finger. BELIZE DRYSTAR® GLOVE is CE certified level 1.KEY FEATURES Alpinestars' new wrist closure system with stretch webbing strap for tight closure. Reflective print to increase rider visibility. Touch screen compatible fingertips for use with smart devices. Stretch accordion inserts on finger tips and backhand to increase flexibility and fit. Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Large stretch panel on backhand for better fit and improved comfort to help reduce fatigue.

A multi-material road riding glove featuring Alpinestars DRYSTAR® PERFORMANCE sealed membrane for waterproofing and sensitivity on the bike's control, the Belize Glove incorporates a matt carbon knuckle guard for class-leading protection. With an innovative new wrist closure for safely securing the glove, the Belize offers optimized levels of comfort, performance and protection.CONSTRUCTION Multi-panel, multi-material construction consisting of stretch polyamide fabric, leather and perforated leather on backhand. Incorporates Alpinestars' waterproof DRYSTAR® PERFORMANCE sealed triple layer construction for a highly reduced material construction to promotes dexterity and sensitivity of bike controls. Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Leather palm, thumb and fourchettes for comfort and durability. Localized perforations on backhand and palm for comfort and airflow. PU-coated reinforcements on palm and thumb provides superior grip on bike's controls.PROTECTION Synthetic suede reinforcements with padding on the palm. TPU palm and finger sliders to provide abrasion resistance on key impact zones. Molded matt carbon reinforced hard knuckle to increase protection. ARSHIELD reinforcements, consisting of aramid fiber and polyamide for abrasion resistance performance for fourth finger. BELIZE DRYSTAR® GLOVE is CE certified level 1.KEY FEATURES Alpinestars' new wrist closure system with stretch webbing strap for tight closure. Reflective print to increase rider visibility. Touch screen compatible fingertips for use with smart devices. Stretch accordion inserts on finger tips and backhand to increase flexibility and fit. Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Large stretch panel on backhand for better fit and improved comfort to help reduce fatigue.

Universal disc lock Lock mechanism with hardened steel armour casing Unique double locking system with hardened steel shackle

Constructed from supple and durable full grain cow and goat leather. Localized perforations on palm and backhand, ventilated fourchettes keep hands cool. Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones. Ergonomic stretch insert on palms. Pre-curved finger construction reduces rider fatigue. Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts. Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around the wrist and raises the entire profile of the glove to protect wrist bone from impact in crash. Velcro wrist adjustable closure strap. External fourth. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Internal surface hand and thumb lining made with DuPont Kevlar fibre. Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide. Palm pad panel combined into palm/thumb/ little finger reinforcement. External finger and palm seams for a close fit and superior feel. Printed logos.

Constructed from supple and durable full grain cow and goat leather. Localized perforations on palm and backhand, ventilated fourchettes keep hands cool. Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones. Ergonomic stretch insert on palms. Pre-curved finger construction reduces rider fatigue. Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts. Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around the wrist and raises the entire profile of the glove to protect wrist bone from impact in crash. Velcro wrist adjustable closure strap. External fourth. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Internal surface hand and thumb lining made with DuPont Kevlar fibre. Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide. Palm pad panel combined into palm/thumb/ little finger reinforcement. External finger and palm seams for a close fit and superior feel. Printed logos.

Constructed from supple and durable full grain cow and goat leather.Localized perforations on palm and backhand, ventilated fourchettes keep hands cool.Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones.Ergonomic stretch insert on palms.Pre-curved finger construction reduces rider fatigue.Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts.Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance.Protective double cuff closure with TPR logo wraps around the wrist and raises the entire profile of the glove to protect wrist bone from impact in crash.Velcro wrist adjustable closure strap. External fourth.Stretch leather accordions on fingers and thumb for superior fit and flexibility.Internal surface hand and thumb lining made with DuPont Kevlar fibre.Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide.Palm pad panel combined into palm/thumb/ little finger reinforcement.External finger and palm seams for a close fit and superior feel.Printed logos.

Constructed from supple and durable full grain cow and goat leather. Localized perforations on palm and backhand, ventilated fourchettes keep hands cool. Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones. Ergonomic stretch insert on palms. Pre-curved finger construction reduces rider fatigue. Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts. Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around the wrist and raises the entire profile of the glove to protect wrist bone from impact in crash. Velcro wrist adjustable closure strap. External fourth. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Internal surface hand and thumb lining made with DuPont Kevlar fibre. Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide. Palm pad panel combined into palm/thumb/ little finger reinforcement. External finger and palm seams for a close fit and superior feel. Printed logos.

This chain lock features Oxford's strongest ever lock with an integral alarm. The Boss Alarm lock has a key replacement service so that if you are unfortunate enough to lose all your keys a new one can be made up. Just remember to take note of your key number and keep this in a safe place.The Oxford Boss and Big Boss alarm have been Independently approved by Thatcham Vehicle Security, SBSC Intygad Produkt, ART 4074 (14mm version)), ART 4075 (16mm version), ART 4076 (chain lock) 5 Year life-cycle tested (by Thatcham) Removable, sealed unit alarm module Water, vibration, frost and heat-proof Batteries Included (6 x LR44) Free Minder Cable Three keys & Key replacement service Can be used as a disc lock or padlock 100db alarm (Also available in a 14mm Big Boss version)Spares available: Batteries x 6 (Oxford part number: OF229B) Alarm module (Oxford part number: OF3A)

The padlock on this range-topper boasts a huge 16mm hardened steel shackle and an anti-pick, double locking mechanism. Each lock comes with three high security semi-elliptical keys along with a replacement key service should any get lost. Though big in strength, the Nemesis padlock can fit under the seat of most motorcycles and is available separately to use as a disc lock.The impressive Nemesis chain wouldn't look out of place attached to a ship's anchor, constructed from huge, 16mm CroMo hardened steel round links, it is available in three lengths; 1.2m, 1.5m &2.0m.The links are covered with a protective and reflective material sleeve - visible so that any would-be thief will spot the Nemesis and find another target.Key features: Reassuringly huge 16mm hardened steel shackle and links Anti-pick, double locking mechanism on padlock Five-minute attack tested against drills, sledgehammers, bolt croppers and saws. Chain available in 1.2m, 1.5m or 2.0m lengths Reflective and protective sleeve on chain Comes with three keys, replacement key service available Sold Secure and ART 4077 approved

This chain lock features Oxford's strongest ever lock with an integral alarm. The Boss Alarm lock has a key replacement service so that if you are unfortunate enough to lose all your keys a new one can be made up. Just remember to take note of your key number and keep this in a safe place.The Oxford Boss and Big Boss alarm have been Independently approved by Thatcham Vehicle Security, SBSC Intygad Produkt, ART 4074 (14mm version)), ART 4075 (16mm version), ART 4076 (chain lock) Boss Alarm Features 14mm 5 Year life-cycle tested (by Thatcham) Removable, sealed unit alarm module Water, vibration, frost and heat-proof Batteries Included (6 x LR44) Free Minder Cable Three keys & Key replacement service Can be used as a disc lock or padlock 100db alarm (Also available in a 16mm Big Boss version)Spares available: Batteries x 6 (Oxford part number: OF229B) Alarm module (Oxford part number: OF3A)

This chain lock features Oxford's strongest ever lock with an integral alarm. The Boss Alarm lock has a key replacement service so that if you are unfortunate enough to lose all your keys a new one can be made up. Just remember to take note of your key number and keep this in a safe place.The Oxford Boss and Big Boss alarm have been Independently approved by Thatcham Vehicle Security, SBSC Intygad Produkt, ART 4074 (14mm version)), ART 4075 (16mm version), ART 4076 (chain lock) Boss Alarm Features 14mm 5 Year life-cycle tested (by Thatcham) Removable, sealed unit alarm module Water, vibration, frost and heat-proof Batteries Included (6 x LR44) Free Minder Cable Three keys & Key replacement service Can be used as a disc lock or padlock 100db alarm (Also available in a 16mm Big Boss version)Spares available: Batteries x 6 (Oxford part number: OF229B) Alarm module (Oxford part number: OF3A)

Constructed from supple and durable full grain cow and goat leather associated with kangaroo leather on palm.Localized perforations on palm and backhand, ventilated fourchettes keep hands cool.Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones.Ergonomic stretch insert on palms.Pre-curved finger construction reduces rider fatigue.Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts.Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance.Velcro wrist adjustable closure strap.Stretch leather accordions on fingers and thumb for superior fit and flexibility.Internal surface hand and thumb lining made with DuPont Kevlar fibre.Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide.Palm pad panel combined into palm/thumb reinforcement.External finger and palm seams for a close fit and superior feel.Touchscreen compatible index fingertip allows the use of smartphone and GPS systems.Printed logos.

Constructed from supple and durable full grain cow and goat leather associated with kangaroo leather on palm.Localized perforations on palm and backhand, ventilated fourchettes keep hands cool.Ergonomic- engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones.Ergonomic stretch insert on palms.Pre-curved finger construction reduces rider fatigue.Alpinestars Dynamic Friction Shield (DFS) knuckle protection system features dual density mould construction for superior resistance to repeated impacts.Moulded knuckle protection air intakes and exhaust ports for improved hand ventilation. Injected TPU palm and finger slider for superior impact and abrasion resistance.Velcro wrist adjustable closure strap.Stretch leather accordions on fingers and thumb for superior fit and flexibility.Internal surface hand and thumb lining made with DuPont Kevlar fibre.Alpinestars patented third and fourth Finger Bridge prevents finger roll separation in the event of a slide.Palm pad panel combined into palm/thumb reinforcement.External finger and palm seams for a close fit and superior feel.Touchscreen compatible index fingertip allows the use of smartphone and GPS systems.Printed logos.

With enhanced ergonomic shaping and design details, the GP Pro R3 is anatomically engineered for performance, protection and comfort. Tested on MotoGP and WSBK circuits around the world, the GP Pro R3 features Alpinestars exclusive Dynamic Friction Shield (DFS) protectors with advanced airflow ventilation and aramidic reinforcement to ensure this glove is primed for superior trackday performance.CONSTRUCTION Mix of cow, goat and kangaroo (palm) leather for superior performance Double closure system for security Dynamic Friction Shield on the cuff for high levels of abrasion resistance Side reinforcements with palm hard slider for superior abrasion resistance Accordions in leather on fingers thumb and backhand to increase fit and direct comfort Aramidic lining on the backhand and landing zone for added protection Thumb and palm reinforcement for a superior grip TPU finger protection for superior protection against impacts Soft padding on fingertips and ergonomic stretch insert on palm for enhanced levels of rider comfortKEY FEATURES Pure racing glove utilizing innovative design features taken straight from the lessons learnt from top level competitive racing Outer seam palm construction for enhanced levels of rider comfort Long cuff for extended coverage Hard knuckle for superior resistance to repeated impacts Knuckle panel perforated gusset for improved levels of hand ventilation Finger bridge on the third and fourth finger prevents finger roll and separation in the event of a slidePROTECTION CE-certified (CAT II Level 2, KP)

With enhanced ergonomic shaping and design details, the GP Pro R3 is anatomically engineered for performance, protection and comfort. Tested on MotoGP and WSBK circuits around the world, the GP Pro R3 features Alpinestars exclusive Dynamic Friction Shield (DFS) protectors with advanced airflow ventilation and aramidic reinforcement to ensure this glove is primed for superior trackday performance.CONSTRUCTION Mix of cow, goat and kangaroo (palm) leather for superior performance Double closure system for security Dynamic Friction Shield on the cuff for high levels of abrasion resistance Side reinforcements with palm hard slider for superior abrasion resistance Accordions in leather on fingers thumb and backhand to increase fit and direct comfort Aramidic lining on the backhand and landing zone for added protection Thumb and palm reinforcement for a superior grip TPU finger protection for superior protection against impacts Soft padding on fingertips and ergonomic stretch insert on palm for enhanced levels of rider comfortKEY FEATURES Pure racing glove utilizing innovative design features taken straight from the lessons learnt from top level competitive racing Outer seam palm construction for enhanced levels of rider comfort Long cuff for extended coverage Hard knuckle for superior resistance to repeated impacts Knuckle panel perforated gusset for improved levels of hand ventilation Finger bridge on the third and fourth finger prevents finger roll and separation in the event of a slidePROTECTION CE-certified (CAT II Level 2, KP)

With enhanced ergonomic shaping and design details, the GP Pro R3 is anatomically engineered for performance, protection and comfort. Tested on MotoGP and WSBK circuits around the world, the GP Pro R3 features Alpinestars exclusive Dynamic Friction Shield (DFS) protectors with advanced airflow ventilation and aramidic reinforcement to ensure this glove is primed for superior trackday performance.CONSTRUCTION Mix of cow, goat and kangaroo (palm) leather for superior performance Double closure system for security Dynamic Friction Shield on the cuff for high levels of abrasion resistance Side reinforcements with palm hard slider for superior abrasion resistance Accordions in leather on fingers thumb and backhand to increase fit and direct comfort Aramidic lining on the backhand and landing zone for added protection Thumb and palm reinforcement for a superior grip TPU finger protection for superior protection against impacts Soft padding on fingertips and ergonomic stretch insert on palm for enhanced levels of rider comfortKEY FEATURES Pure racing glove utilizing innovative design features taken straight from the lessons learnt from top level competitive racing Outer seam palm construction for enhanced levels of rider comfort Long cuff for extended coverage Hard knuckle for superior resistance to repeated impacts Knuckle panel perforated gusset for improved levels of hand ventilation Finger bridge on the third and fourth finger prevents finger roll and separation in the event of a slidePROTECTION CE-certified (CAT II Level 2, KP)